收藏本站
CS5464
lists the functions of E3 as controlled by E3MODE[1:0]
in the Modes register when E1MODE is not enabled.
6.8 No Load Threshold
The No Load Threshold register ( Load MIN ) is used to
E3MODE1 E3MODE0
0 0
E3 output
Reactive Energy
zero out the contents of E PULSE and Q PULSE registers if
their magnitude is less than the Load MIN register value.
0
1
1
1
0
1
Power Fail Monitor
Voltage Sign
Apparent Energy
6.9 Energy Pulse Width
Note: Energy Pulse Width ( PulseWidth ) only applies to
E1, E2, or E3 pins that are configured to output pulses.
When any are configured to output steady-state signals,
Table 5. E3 Pin Configuration
When both E2MODE bits are high, the E1MODE bits
are enabled, allowing active, apparent, reactive, or
wideband reactive energy for both energy channels to
be output on E1 and E2. Table 6 lists the functions of E1
and E2 with E1MODE enabled.
such as voltage sign, energy channel in use, power fail
monitor, or energy sign, pulse widths and output rates
do not apply.
The pulse width time (t pw ) in Figure 2 , is set by the value
in the PulseWidth register which is an integer multiple of
the sample or output word rate (OWR). At OWR of
4000 Hz (a period of 250 uS) t pw = PulseWidth x 250uS.
By default, PulseWidth is set to 1.
E1MODE1 E1MODE0
E1 / E2 outputs
6.10 Energy Pulse Rate
0
0
1
1
0
1
0
1
Active Energy
Apparent Energy
Reactive Energy
Wideband Reactive
The full-scale pulse frequency of enabled E1, E2, E3
pins is the PulseRate x output word rate (OWR)/2. The
actual pulse frequency is the full-scale pulse frequency
multiplied by the pulse register’s ( E PULSE , S PULSE ,
Q PULSE ) value.
Table 6. E1 / E2 Modes
When E1MODE bits are enabled, the E3 pin outputs ei-
ther th e power fail monitor status, or the sign of the E1
and E2 outputs. Table 7 list the functions of the E3 pin
using E3MODE[1:0] in the Modes register when
E1MODE is enabled .
Example:
If the output word rate (OWR) is 4000 Hz, and the
PulseRate is set to 0.05, the full-rate pulse frequency is
0.05 x 4000 / 2 = 100 Hz. If the E PULSE register, driving
E1, is 0.4567, the pulse output rate on E1 will be
100 Hz x 0.4567 = 45.67 Hz.
6.11 Voltage Sag/Current Fault Detection
Voltage sag detection is used to determine when aver-
E3MODE1 E3MODE0
E3 output
aged voltage falls below a predetermined level for a
0
0
1
0
1
0
Power Fail Monitor
Energy Sign
not used
specified interval of time. Current fault detection deter-
mines when averaged current falls below a predeter-
mined level for a specified interval of time.
The specified interval of time (duration) is set by the val-
1 1 not used
Table 7. E3 Pin with E1MODE enabled
ue in the V1Sag DUR ( V2Sag DUR ) and I1Fault DUR
( I2Fault DUR ) registers. Setting any of these to zero (de-
fault) disables the detect feature for the given channel.
The value is in output word rate (OWR) samples. The
predetermined level is set by the values in the
V1Sag LEVEL
( V2Sag LEVEL ) and
I1Fault LEVEL
( I2Fault LEVEL ) registers.
Since the values of V1 and V2 come from the same in-
put, only one voltage sag detector is necessary.
20
DS682F3
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CS5466-ISZR IC ENERGY METERING 1PHASE 24SSOP
CS5466-IS IC ENERGY METERING 1PHASE 24SSOP
CS8312YN8 IC PREDRIVER IGBT IGNITION 8DIP
CX1006 SOCKET ADAPTER 40TSOP SUPERPRO5K
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
相关代理商/技术参数
CS5464-ISZ 功能描述:电流和电力监控器、调节器 3-Ch Single Phase Power/Energy IC RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
CS5464-ISZR 功能描述:电流和电力监控器、调节器 IC 3-Ch Single Phase PWR/Energy RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
CS5466 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Low-cost Power/Energy IC with Pulse Output
CS5466_05 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Low-cost Power/Energy IC with Pulse Output
CS5466-IS 功能描述:电流和电力监控器、调节器 Low-Cost Pwr/Energy w/Pulse Output IC RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
CS5466-ISZ 功能描述:电流和电力监控器、调节器 Low-Cost Pwr/Energy w/Pulse Output IC RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
CS5466-ISZD1 制造商:Cirrus Logic 功能描述:
CS5466-ISZR 功能描述:电流和电力监控器、调节器 IC for Residential PWR-Meter Apps RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel